Snow Blowing Tips for Quick and Easy Snow Removal

 Snow Blowing Tips for Quick and Easy Snow Removal 

 

These snow blowing advice will help you maintain and operate your snow blower safely and efficiently. Read through these ideas carefully—there are a few you'll want to undertake before you're buried with snow. 

 

Blowing Snow 

Operating a  Snow removal near me appears to be a talent that can be learned in two minutes. But, if it's that easy, why are approximately 6,000 blower-related accidents in the United States each year? And why do repair shops get overburdened after a major storm? 

 

To acquire answers, we spoke with specialists from all of the major manufacturers, as well as blower repairmen. It turns out that operator mistake is the leading cause of clogs and breakdowns, and poor clog clearance is the leading cause of injuries. The experts provided some excellent advice on how to prevent both. So, even if you're a seasoned snow blower operator, keep reading. 

 

Don't Wait for the Snow to Stop Falling 

Waiting for it to finish snowing is a common snow removal mistake. The truth is that you should begin cleaning the snow before it accumulates to 6 inches. Sure, you'll have to spend more time snowblowing, but your machine will work less hard and throw the snow farther. The snowbanks flanking your driveway will be reduced in height as a result. 

 

Throw as much snow as you can. 

Avoid throwing snow halfway off the driveway and then throwing it again. This only increases the burden on the blower. There are four ways to maximize your throw: Take smaller bits of snow, operate the blower at maximum rpm but at a slower ground speed, elevate the chute diverter and blow with the wind. 

 

Prepare Your Property for Snowfall 

If you take the time to winterize your driveway and sidewalks, it will make snow removal much easier. Begin by inspecting your property. Rocks, dog tie-out wires, extension cords, holiday light cords, and garden hoses should all be removed. Then, mark paths that pass near gardens so that you don't suck up rocks and garden edging with your snowblower. Driveway markers should be used to indicate the perimeters of your path and driveway. If the ground is already frozen, just drill a hole with your battery-powered drill and a masonry bit. 

 

Keep an eye out for half-buried newspapers. 

The most common cause of machine jams is a frozen newspaper. It has the potential to destroy shear pins or belts, as well as damage expensive auger and impeller components. A fresh coating of snow on top of the newspapers obscures their visibility and makes them easier to overlook. So, before you hit it, scout the area to protect your machine. 

 

If you suck up a newspaper, turn off the motor and retrieve it with a broom or shovel handle, never your hands. If you can't get the paper out, take your machine to a professional, who will charge far less than even the cheapest surgeon. Use these steps to fix a snow blower that won't start to avoid any other problems while removing snow.